Jaime : - tous les modes présents (impulsion, rapide, lent, peak et Leq) - le bargraph avec retenue de maximum, - les diverses pondérations, - lanalyse par bande doctave, il ne manque plus quun affichage "analyseur de spectre". Laffichage est sobre, voire spartiate, le bel écran de liPhone peut mieux faire, jattends la prochaine mise à jour avec impatience. Je ne peux rien dire sur le calibrage, car il me reste à trouver un microphone de mesure compatible avec ma source étalon 94 dB. La mesure des faibles niveaux (en dessous de 50 dB) est incertaine, mais là je crains que ce soit dû au bruit de fond de lélectronique de liPhone lui-même.
Estimation application downloads and cost
Description
SPL is a professional-grade digital sound level meter (decibel meter) for your iPad, iPhone or iPod touch. It includes all of the modes, filters, and features that you would expect from a professional ANSI or IEC Sound Level Meter. All filters and averaging modes meet or exceed the criteria for ANSI Type 1 standards or better. SPL is created from the same team who brought you the Audio Toolbox and ATB Plus.
Store Results -- Uses the same powerful Save / Recall engine as our premier app, AudioTools. Allows storing GPS and time-stamped results, and exporting them to your computer.
You can also use SPL with our calibrated iPhone measurement mic, iTestMic, or iAudioInterface.
The screen flips if you turn the phone upside down, so that you can point the built-in iPhone mic directly at the sound source.
*** Modes: Slow, Fast, Impulse, Peak, and Leq.
*** Filters: A and C weighting, and 10 octave band filters.
*** Includes a resettable Max field to track the highest reading.
*** Includes a reference field (except in Leq mode) so that you can set a reference level and do seat-to-seat comparisons.
The SPL meter can be fully calibrated. It comes preset with the calibration for a typical iPad, iPhone, and iPod Touch. Most iOS devices will be within a few dB of this reading. If you have access, even temporarily, to a calibrated sound level meter, just use the calibration field on the settings scree to match the meter, and you will be accurately calibrated.
Also, see our other professional-grade audio apps: AudioTools, our premier suite of professional-caliber audio and acoustics test apps, Speaker Pop, to test speaker polarity, and RTA, a real-time analyzer for the iPhone.
And, we have a group of calibrated, accurate measurement microphones, including iTestMic,iTestMic2, and iAudioInterface2, that allows full professional results for Type 1 or Type 2 measurements.
This will allow measuring a range from approximately 30 dB SPL to 130 dB SPL. Each mic will include a calibration factor that you will enter into the SPL app for calibrated measurements. This mic will also work with Speaker Pop, our speaker polarity tester, FFT, RTA, ETC, and other acoustical measurement apps in our AudioTools app that is available now.
Also, see our iAudioInterface2 system, which supports any pro test and measurement mic.
Now includes an iPhone internal mic compensation filter, to cancel out the low-frequency roll-off present in the iPhone and other iOS devices.
See our other audio apps, including AudioTools.
Read more
Store Results -- Uses the same powerful Save / Recall engine as our premier app, AudioTools. Allows storing GPS and time-stamped results, and exporting them to your computer.
You can also use SPL with our calibrated iPhone measurement mic, iTestMic, or iAudioInterface.
The screen flips if you turn the phone upside down, so that you can point the built-in iPhone mic directly at the sound source.
*** Modes: Slow, Fast, Impulse, Peak, and Leq.
*** Filters: A and C weighting, and 10 octave band filters.
*** Includes a resettable Max field to track the highest reading.
*** Includes a reference field (except in Leq mode) so that you can set a reference level and do seat-to-seat comparisons.
The SPL meter can be fully calibrated. It comes preset with the calibration for a typical iPad, iPhone, and iPod Touch. Most iOS devices will be within a few dB of this reading. If you have access, even temporarily, to a calibrated sound level meter, just use the calibration field on the settings scree to match the meter, and you will be accurately calibrated.
Also, see our other professional-grade audio apps: AudioTools, our premier suite of professional-caliber audio and acoustics test apps, Speaker Pop, to test speaker polarity, and RTA, a real-time analyzer for the iPhone.
And, we have a group of calibrated, accurate measurement microphones, including iTestMic,iTestMic2, and iAudioInterface2, that allows full professional results for Type 1 or Type 2 measurements.
This will allow measuring a range from approximately 30 dB SPL to 130 dB SPL. Each mic will include a calibration factor that you will enter into the SPL app for calibrated measurements. This mic will also work with Speaker Pop, our speaker polarity tester, FFT, RTA, ETC, and other acoustical measurement apps in our AudioTools app that is available now.
Also, see our iAudioInterface2 system, which supports any pro test and measurement mic.
Now includes an iPhone internal mic compensation filter, to cancel out the low-frequency roll-off present in the iPhone and other iOS devices.
See our other audio apps, including AudioTools.
SPL screenshorts
Application availability
Available in countries
| Country | Price |
|---|---|
| Canada | 11.99 CAD |
| China | 58 CNY |
| France | 9.99 EUR |
| Germany | 9.99 EUR |
| Italy | 9.99 EUR |
| Netherlands | 9.99 EUR |
| Portugal | 9.99 EUR |
| Spain | 9.99 EUR |
| Poland | 8.99 EUR |
| UK | 8.99 GBP |
| India | 999 INR |
| Japan | 1300 JPY |
| Korea, Republic Of | 12000 KRW |
| Poland | 49.99 PLN |
| Russia | 799 RUB |
| Turkey | 349.99 TRY |
| USA | 8.99 USD |
| Korea, Republic Of | 8.79 USD |
| Ukraine | 9.99 USD |
Available for devices
iPhone3GS, iPhone4, iPodTouchFourthGen, iPad2Wifi, iPad23G, iPhone4S, iPadThirdGen, iPadThirdGen4G, iPhone5, iPodTouchFifthGen, iPadFourthGen, iPadFourthGen4G, iPadMini, iPadMini4G, iPhone5c, iPhone5s, iPadAir, iPadAirCellular, iPadMiniRetina, iPadMiniRetinaCellular, iPhone6, iPhone6Plus, iPadAir2, iPadAir2Cellular, iPadMini3, iPadMini3Cellular, iPodTouchSixthGen, iPhone6s, iPhone6sPlus, iPadMini4, iPadMini4Cellular, iPadPro, iPadProCellular, iPadPro97, iPadPro97Cellular, iPhoneSE, iPhone7, iPhone7Plus, iPad611, iPad612, iPad71, iPad72, iPad73, iPad74, iPhone8, iPhone8Plus, iPhoneX, iPad75, iPad76, iPhoneXS, iPhoneXSMax, iPhoneXR, iPad812, iPad834, iPad856, iPad878, iPadMini5, iPadMini5Cellular, iPadAir3, iPadAir3Cellular, iPodTouchSeventhGen, iPhone11, iPhone11Pro, iPadSeventhGen, iPadSeventhGenCellular, iPhone11ProMax, iPhoneSESecondGen, iPadProSecondGen, iPadProSecondGenCellular, iPadProFourthGen, iPadProFourthGenCellular,Versions and releases
Latest version SPL: 7.3
-Updated for latest iOS devices and calibrations
-Bug fixes and operational improvements
Apps Changes History:
- 4 months ago: New App Version 7.1 ☛ 7.3
Reviews
Pas mal du tout en effet
Great app
Best iPhone db meter Ive seen.
Very nice
Clean, simple and handy. Glad I bought it!
Professional
Very nice!! Just one request off the top though... Please add an option to stop the screen time-out... That would be great, thanks!
Love it!
Great meter. Love that it flips around. This thing rocks!!!!
Needs an update
This is a great application that does as advertised. We use it in a church setting to monitor levels for the congregation and work on mix levels. The application is not happy with iOS 4.1. Please update it.
IPhone froze up
Does not work on the iPhone 4 (running is 4.2). It locked up and froze the phone and would not even power off! After 5 min. trying, the phone shut off.... But would not come back on! After another 5 min. my phone finally came back on, and I deleted the app. I would like my money back.
Other apps from Andrew Smith
