DP4MiniRemote at Mac App Store analyse

The small brother of DP4Remote offers the possibility to remote control several functions of XTA Electronics® DP4-Series® Loudspeaker Management Systems from your iPhone® or iPod Touch®. Also the Martin Audio® DX2®, the Funktion One X04A® and the D.A.S. Audio DSP 4080® & DSP2060® controller are supported. DP4MiniRemote gives you control over the following functions of your device: • Gain • Mute DP4MiniRemote monitors the following functions of your device: • Level Meters • Gain • Mute • Phase • Delay • xOver • Parametric EQs • Graphic EQs • Routing • Ganging • Names DP4MiniRemote is compatible with XTA Electronics DP448®, DP446®, DP444® controllers as well as with the Martin Audio® DX2®, the Funktion One X04A® and the D.A.S. Audio DSP 4080® & DSP2060® OEM-Units. For full control over your device please check out for DP4Remote. IMPORTANT NOTES: • You will need a working wireless connection to your controller (tested with XTA Wiser2400® and Moxa N-Port 5110). • For more than 4 devices a serial connection speed of 115kBaud is recommended. • For working with a XTA WISP some additional hardware & configuration are necessary. We recommend to use another serial / ethernet connection. • DP4MiniRemote works with a maximum of 32 devices at a time. • DP4MiniRemote is a third party application (this means this application is not developed by XTA Electronics®). • DP4MiniRemote will work on any iPhone® / iPod touch® with iPhone OS 5.1 or higher. Recommended devices are iPhone4S® / 5® and the last generation iPod touch. • Although well tested - this application remain a piece of software: rockbaby engineering will not take any responsibility for any issues that may occur using DP4MiniRemote. • XTA Electronics® DSP-algorithms are sensitive information to which we don´t have access. So please note that our graphical representation of parametric EQs and xOvers displays the "standard" ones - those may vary a bit from XTA Electronics® unique and brilliant algorithms.