UHFRControl at Mac App Store analyse

This application offers the possibility to remote control SHURE® UHFR-Series receivers and preform scans with them via your iPad®. UHFRControl can monitor the following parameters of your UHFR-Series receivers: • Audio Level • Antenna Level & Diversity • Frequency • Squelch • Gain • Sensitivity • Battery Level • Transmit Power • Locks (Frequency & Power) UHFRControl can control the following parameters of your UHFR-Series receivers: • Frequency • Squelch • Audio Output & Mute • Name UHFRControl can set of the Sync-Parameters of your UHFR-Series receivers: • Sensitivity • Gain • Transmit Power • Battery Type • Locks (Frequency & Power) UHFRControl let´s you preform scans UHFR-Series receivers and save them for later use: • Scan your receivers frequency band. • Save the scans to the iPad®. • Export the scans to the iPad® in the SHURE® Wireless Workbench 6 format. • Import scans from the iPad®. • Import scans to the iPad® in the SHURE® Wireless Workbench 6 format. • Exchange the saved files via iTunes on your Mac® / PC. IMPORTANT NOTES: • UHFRControl has NO offline mode. • You will need a working wireless connection (means: a WIFI-Router) to the SHURE® UHFR-Series receivers. • All receivers need to be in the same subnet-mask & ip-range. • The receivers need a minimum firmware version of V1.167. • UHFRControl will work on any iPad® or iPad mini® with iOS 5.1 or higher. • Although well tested - this application remain a piece of software: rockbaby engineering will not take any responsibility for any issues that may occur using UHFRControl.